Alpha Prime Graphene 10H

Application

Use product in a wind and dust-free, room-temperature environment.

1. Shake the bottle thoroughly before use.
2. Apply a thick layer of the product on to the surface of the coating pad. An insufficient amount may lead to stains.
3. Apply the product on a 1/4 of the hood (normal size sedan). Do not leave longer than 60 seconds.
4. Use a microfiber towel and buff the coated surface.
5. Repeat the process throughout the whole vehicle.

Warning

• It is advised to store the vehicle indoors during the initial night following application. Ensure it remains shielded from any moisture, including rain or dew.
• It will take about 10 days for the coating to completely cure.
• During the curing time, avoid chemicals, mud, rain and snow during this period of time.
• The coating is very sensitive during the first 3-4 days of curing.
• The coating can be tested after about 7 days of curing.

Additional Information

• Unlike most other ceramic coating products, this product will cure effectively even in temperatures as low as -5 degrees.
• Remove any coating stains using a damp towel.
• The product's lower viscosity renders it more user-friendly in comparison to competitors.
• This ceramic coating incorporates patented carbon nanotube technology, establishing it as the world's most robust ceramic coating, a designation substantiated by SGS verification.