Alpha Fallout Direct

Application

Use product in a wind and dust-free, room-temperature environment.

1. Start by thoroughly washing your car with a high-quality car wash soap and a microfiber wash mitt or sponge to eliminate loose dirt, grime, and debris.
2. Choose a shaded area to park your car and ensure that the surface is cool to the touch. Shake the Alpha Fallout Direct bottle well to mix the ingredients. Apply Alpha Fallout Direct directly onto the car's surface, focusing on one panel at a time.
3. Allow Alpha Fallout Direct to sit on the surface for up to 10 minutes to let it react with and dissolve embedded iron particles and lime scale in the paintwork.
4. If needed, gently agitate the surface with a soft detailing brush or microfiber towel after the sit time to loosen stubborn iron particles and lime scale, taking care to avoid scratching the paint.
5. Thoroughly rinse the surface with clean water using a hose or pressure washer to remove Alpha Fallout Direct residue and dissolved iron particles and lime scale.
6. Inspect the treated areas under good lighting to ensure effective removal of iron particles and lime scale. Repeat the process if heavily contaminated areas persist.
7. After using Alpha Fallout Direct, perform a final wash with a pH-neutral car wash soap to eliminate any remaining residue and achieve a clean finish. Dry the car completely using a clean microfiber towel.
8. Depending on your car's paint condition and detailing preferences, consider additional steps such as claying or polishing for further paint correction and protection.

Remember to wear gloves and work in a well-ventilated area when using Alpha Fallout Directs to ensure safety during the process. Following these steps will help you successfully remove iron and lime scale contamination from your car's paint and enhance its overall appearance.

Warning

• When using Alpha Fallout Direct, ensure not to let it dry on the painted surface.