Alpha Febreco

Application

Use product in a wind and dust-free, room-temperature environment.

1. Ensure that the surfaces to be coated are clean and dry prior to application.
2. For fabrics with a fibrous texture, use a bristle brush to align fibers in one direction.
3. Shake well the Alpha Febreco before evenly spraying onto the surface, holding bottle six inches away from the surface.
4. Brush fibers in the opposite direction and repeat the spraying process.
5. Allow the coating to cure and undisturbed for a minimum of 4 hours.

Warning

• It is advised to store the vehicle indoors during the initial night following application. Ensure it remains shielded from any moisture, including rain or dew.
• It will take about 24 hours for the coating to completely cure.
• During the curing time, avoid chemicals, mud, rain and snow during this period of time.
• The coating is very sensitive during the first 12 hours of curing.
• The coating can be tested after about 24 hours of curing.

Additional Information

• Apply the product at room temperature.
• Do not wipe off the coating with a towel after applying; let it dry naturally.
• If the sprayer malfunctions, remove the spray and spray it into the air several times to normalize the atomizer pressure before reattaching and using it again.