Alpha Rapid

Application

Use product in a wind and dust-free, room-temperature environment.

Wet Application

1. Wash the car and rinse with high-pressure water.
2. Shake the product and keep it away from the surface about 30~40cm. Spray the product onto
   the wet surface so that the surface is covered in drizzle.
3. Use the product per panel in the beginning, once you get used to it work 2~3 panels at a time.
4. Repeat the process throughout the whole vehicle.
5. Dry the surface with a drying towel.

Dry Application

1. Shake the product before use.
2. Spray the product 2~3 times onto the surface.
3. Use a microfiber towel and gently buff the coated surface.

Warning

• If used as a wet coat on a surface without any coating, the performance will only be around 50%.
• Occasionally, the spray nozzle may accumulate pressure and experience malfunction. To address this, unscrew the trigger and discharge the product into the air a few times to release the built-up pressure.
• Use a damp towel to remove any coating stains.

Additional Information

• Strong water-repellency.
• Wet & Dry dual application method.